STREET PAINT

Coloured Street Paint

ISONEM STREET PAINT, is acrylic based flexible floor coating with strong adhesion, excellent water resistance and UV resistance. It is water-based and one-component, can be produced in desired color. It is water-based and one-component, can be produced in the desired color, is not affected by human and vehicle traffic, dries quickly and is easy to work. It is very suitable for walking paths, asphalt pavements, tennis courts and sports fields. It is used to obtain dust free and decorative surfaces on asphalt, concrete and cement surfaces in indoor and outdoor.

TECHNICAL SPECIFICATIONS

Density (25°C, g/mL): 1,40 ± 0,10

pH (25°C): 7.0 – 9.0

Viscosity (25°C, mPa.s): 9000 - 12000

Solid content (% Weight): 74 ± 2

Water transmission rate (kg/ m². h^0,5): < 0,1 CLASS W₃

Adhesion strength by pull-off test (N/mm²): Crack bridging flexible systems with trafficking 1.5 N/mm²

Permeability to water vapour (m): 5 ≤ SD ≤ 50 CLASS II

Solvent: Water

Documents of the Product

ISONEM STREET PAINT TSE CERTIFICATE

CE CERTIFICATE
ISO CERTIFICATE
122-ОР-06-2020 The decision that the products are not subject to the requirements of the “Technical Regulation on Fire Safety Requirements”

Certificate of State Registration of Products (SGR)

TDS (EN) - ISONEM STREET PAINT

· Garages and light traffic exposed to parking areas

· Walking paths, garden floors,

· On concrete or asphalt roads, parking areas,

· Tennis, basketball, volleyball court grounds

· Game and entertainment areas

Surface preparation: Substrate must be clean, dry. Surfaces should be cleaned with water wait for the dry. Surface must be washed with water and then application should be made before drying totally. Surface defects and voids should be repaired with ISONEM MS MORTAR with a thickness of 5 mm. All surfaces to be treated ISONEM Universal Primer (1: 7 diluted with water - 1 part primer, 7 part water) primed with the adhesion promoter and primer should dry at least 4 hours then ISONEM STREET PAINT can be applied.

Application method: ISONEM STREET PAINT is ready to use. It is mixed homogeneously with the help of a mixer in the bucket for 5 minutes and applied to the surface in two coats with a brush, roller or suitable spray gun, the waiting time between the coats is at least 4 hours. In the application with the sprayer, homogeneous distribution and penetration of the application on the surface are provided by brush or roller after application.

CONSUMPTION: 1 kg/m² (two layers application)

PAINTABLE (COVERAGE) AREA: Min. 18 m²/bucket (two layers application)

COLOR: All requested can be produced in colors.

PACKAGING: 18 kg PP in buckets

SHELF LIFE: 24 months from date of production if stored in original, unopened, undamaged packages.

STORAGE CONDITION: Store tightly closed in a dry and cool place.

...