ISO-FIX WELDING PASTE is a strong adhesive paste that provides a quick solution for all kinds of repairs on wet or dry surfaces. It is effective in sealing cracks and holes, stopping leaks, repairing all kinds of superficial damage, and bonding similar and dissimilar components with each other. After application, the fully cured material can be drilled, sanded, and painted without primer. It provides superior adherence to materials such as metal, wood, marble, ceramic, glass, hard plastic, brick, concrete, etc.


Technical Specifications

Density A Comp. (25°C, g/mL) : Not applicable (N/A)

pH (25°C) : Not applicable(N/A)

Viscosity A Comp. (25°C, mPa.s) : Not applicable(N/A)

Solid Content (by weight %) : Not applicable (N/A)

Water Transmission Rate (kg/ m2. h0,5) : < 0,1 CLASS W3

Adhesion strength by tensile pull-out test (N/mm2) : 10,0 N/mm²

Water vapor permeability  (m) : 5 ≤  SD ≤ 50 CLASS II

Touch Dry : 1 hour

Hard Dry: 2 hours

Mixture durability (23°C) : 30 - 40 minutes

Solvent: Organic solvent

Fire Class: C fl S1

Color: Blue


Documents of the ProductDocuments of the Product

Used for repairing water, fuel tanks, and plumbing leaks repairing environments such as pools and aquariums, repairing solar energy systems, repairing all kinds of industrial and automotive sector repairs, filling holes and straightening bent surfaces, and many more.

Surface Preparation
The application surfaces must be free from all kinds of oil, dirt, dust, and surface residues and be completely dry and clean.

Preparation of the mixture: First, open the solvent-free adhesive (component A) box, and with the help of a knife, slice off as much material as needed. Then, the hardener (component B) is taken in the same proportion by weight and mixed thoroughly by kneading by hand. It is very important to mix the material at the specified mixing ratio. Gloves should be worn during the hand-mixing process.

Method of Application The prepared mixture is applied to the application area by sticking manually.
The surface should be protected from all external factors, such as rain, water, mechanical impacts, etc., for 24 hours during and after the application. Components A and B should be used within 30-40 minutes after mixing (23°C). At lower temperatures, the mixture's durability is extended, and at higher temperatures, the mixture's durability is shortened.



Packaging & Storage

Package: 40 gr set (A Component: 20gr , B Component:20 gr)

Storage temperature (°C) : 5 - 35 °C 

Shelf life : The product is suitable for use for 24 months from the date of manufacture if stored in original, unopened, and undamaged packaging.

Storage conditions : Store in dry and cool places, away from heat and fire, with the package closures tightly sealed.
Health and Safety Information

For information and recommendations on the safe handling, storage, and disposal of chemical products, users should consult the latest Safety Data Sheet, which contains physical, ecological, toxicological, and other safety-related data.


Share this product: