L TRANSPARENT POWER

ISONEM L is a water-based pure acrylic new generation transparent waterproofing with excellent adhesion to all surfaces. It is ready to use, UV resistant, glossy and elastic. It is used as a waterproofing material for all kinds of concrete, ceramic, plaster, painted and unpainted surfaces, marble, glass, plastic, metal, tile, stone wall, wood, etc. It is easy and economical to work with.

 

TECHNICAL SPECIFICATIONS

Density (25°C, g/mL): 1.00 ± 0.10

pH (25°C): 7.0 – 9.0

Viscosity (25°C, mPa.s): 13000 – 15000

Solid content (% by weight): 49 ± 2

Water transfer rate (kg/ m2. h0.5): < 0.1 CLASS W3

Adhesion strength by pull-off test (N/mm2): Crack closure or flexible systems without traffic load ≥ 0.8

Water vapor permeability (m): 5 ≤ SD ≤ 50 CLASS II

Touch dry: 3 hours

Hard dry: 72 hours

Solvent: Water

Fire class: D-s2 d0

Color: Transparent

Documents of the ProductDocuments of the Product

It can be used on bathroom floors, joints, cracks, window edges, glass, painted walls, plaster, stone walls, wood, shingle and tile roofs, and any surface where transparent waterproofing is required.

Surface Preparation: The substrate must be sound and all surfaces must be cleaned from oil, dirt, and similar residues before application. After opening the package, it should be mixed thoroughly and applied directly to the surface in 2 coats without thinning with a brush, roller, or spray gun. Before application on surfaces such as sheet metal/metal, the surfaces should be primed with ISONEM Anti Rust Primer (Anticorrosive Primer) with a consumption of 0.250 - 0.350 kg/m².

 

Method of application: ISONEM L is ready for use only after opening the lid and should be mixed homogeneously before application. The glossy surfaces to be applied are applied in 2 coats with a roller and the other surfaces are applied with a brush and a suitable sprayer. It should be allowed 4 hours between coats. The product is suitable for applications between +5°C and +35°C.

 

Practical considerations: The application surface must be clean and free from dirt, oil, and mud. The product is milky white when applied. After the drying process is completed, it becomes transparent. It is normal to observe white color on the surface in very thick applications. Therefore, it should be applied thoroughly on the surface without thick application.

CONSUMPTION: 0.2 kg/m² (in double application) The consumption values given as approximate and may vary according to the area of the application surface and the application thickness.

PAINTABLE (COVERABLE) AREA: 1 L: 5 m² (two layers of application)

COLOR: Transparent

PACKAGING TYPE: 1 L PP bucket

SHELF LIFE: If stored in original, unopened, and undamaged packaging, the product is safe for use for 24 months from the date of manufacture.

STORAGE CONDITIONS: Store in a dry and cool environment. Store with the package lids tightly closed.

...
Share this product:
x